Floor screed in synthetic resin with a thickness of 5-15mm.
This flooring can be laid eve on imperfect surfaces.
Any inadequacies in the support can be corrected with appropriate products.
Standard UNI 11146 - UNI 10966 - UNI 8298-9

DESCRIPTION
High strength monolithic floor flush with the underlying plate. Thickness of approx. 10mm of synthetic resin mortar applied to the concrete plate which is dry and has been roughened mechanically.

WHERE IT IS APPLIED
Suitable for loads (lI) and operations (M-P) (See DIN Standard 1100) Heavy industry, intensive warehousing, offices etc..

SPECIFICATION FOR THE DESIGN
CHEMIDUR ST monolithic industrial flooring comprising:

1. PREPARATION
   Prepare the application surface by using mechanical equipment and dust extraction
2. SURFACE LAYER
   Application of epoxy primer. Laying a mixture based on spheroidal quartz and hard minerals with a homogeneous granulometric curve of between 0.125 and 3.0mm mixed with synthetic resins in a ration of 1:10(resin to aggregate) smoothed and a finishing coat applied to seal the porous surface
3. LOAD BEARING CONCRETE PLATE
   Cured concrete plate (Formulated and reinforced concrete to achieve the performance required by the design of the project. Resistance, durability and controlled shrinkage are basic elements of DURSICAL). Thickness and reinforcement requires a design project
4. SEPARATION BARRIER
   PVC isolation layer between the base and the flooring Separation from the elevated structures
5. SUPPORTING BASE
   Soil stabilised using the Westergaard method