Flush monolithic, reinforced flooring. Surface layer of between 10 and 50mm.
This floor is welded to the existing concrete plate.
Standard UNI 11146

DESCRIPTION
High strength flush monolithic floor with concrete load bearing plate. Application terminology: "FACING" obtained by applying the surface layer as a mortar with a thickness of approx. 10 to 50mm on concrete with an appropriate primer D1-5.

WHERE IT IS APPLIED
Flush monolithic flooring. Welded to the concrete load bearing plate Suitable for loads (lI) and operations (M-P) (See DIN Standard 1100) Heavy industry, intensive warehousing, offices etc.

SPECIFICATION FOR THE DESIGN
DURSIL 1-5 monolithic industrial flooring comprising:

1. SURFACE LAYER
   A mixture based on spheroidal quartz and hard minerals with the addition of special binders, with a homogeneous granulometric curve of between 0.125 and 3.0mm, in ratio from 12 to 40kg per m² Mixed with water and cement The compound is applied as mortar to existing concrete.
2. PRIMER
   Application of fixing primer D 1-5 by roller.
3. EXISTING CONCRETE PLATE
   Existing cured concrete plate Cleaned of any impurities using mechanical equipment that roughens the surface.
4. SUPPORTING BASE
   Soil stabilised using the Westergaard method.