A lighter monolithic flooring on a supporting structure. Thickness of 10/15cm. Surface layer of approx. 3mm.
This flooring is laid on a prefabricated structure.
Standard UNI 11146 - Chapter 4.2

DESCRIPTION
Medium strength, structural monolithic floor on a prefabricated structure Application Terminology: "FACING" obtained by applying the surface layer as a dry shake of approx. 3mm on a DURSICAL Light concrete of between 10 and 15cm thickness.

WHERE IT IS APPLIED
Newly constructed monolithic floor On a pre-fabricated structure. Suitable for loads (l) and operations (L) (See DIN Standard 1100) Flooring slab, car parks etc..

SPECIFICATION FOR THE DESIGN
DURSIL Light monolithic industrial flooring comprising:

1. SURFACE LAYER
   A mixture based on spheroidal quartz and hard minerals with the addition of special binders, with a homogeneous granulometric curve of between 0.125 and 2.0mm, in ratio of 2-3kg per m². Dry mixed with 2Kg of cement per m² The compound is applied as a dusting on fresh concrete and then finished.
2. LOAD BEARING CONCRETE PLATE
   DURSICAL Light concrete plate with a thickness of between 5 and 10cm. (Light weight concrete which is formulated and reinforced to achieve the performance required by the design of the project. Resistance, durability and controlled shrinkage are basic elements of DURSICAL). Thickness reinforcement require a design project
3. SEPARATION BARRIER
   PVC isolation layer between the base and the flooring Separation from the elevated structurese
4. SUPPORTING BASE
   Pre-existing plate or prefabricated structure