Structural reinforced monolithic flooring. Thickness of 20/30cm. Surface layer of Approx. 10mm.
This flooring is laid directly on ballast.
Standard UNI 11146 - Chapter 4.1 - NTC 1/2008

DESCRIPTION
High strength structural monolithic flooring resting on ballast. Application Terminology: Fresh on Fresh" obtained by applying the surface layer as a mortar of approx. 10cm on DURSICAL M concrete with a thickness of between approx. 20 and 25cm.

WHERE IT IS APPLIED
Newly constructed monolithic floor Laid on ballast Suitable for loads (lI) and operations (M-P) (See DIN Standard 1100) Heavy industry, intensive warehousing, offices etc.

SPECIFICATION FOR THE DESIGN
DURSIL M monolithic industrial flooring comprising:

1. SURFACE LAYER
   A mixture based on spheroidal quartz and hard minerals with the addition of special binders, with a homogeneous granulometric curve of between 0.125 and 3.0mm, in ration to 10-12 kg per m² Mixed with water and 7Kg of cement per m² The compound is applied as mortar on fresh concrete and then finished
2. LOAD BEARING CONCRETE PLATE
   DURSICAL M concrete plate with a thickness of between 20 and 25cm. (Formulated and reinforced concrete to achieve the performance required by the design of the project. Resistance, durability and controlled shrinkage are basic elements of DURSICAL). Thickness reinforcement require a design project
3. SEPARATION BARRIER
   PVC isolation layer between the base and the flooring Separation from the elevated structures
4. SUPPORTING BASE
   Soil stabilised using the Westergaard method