Industrial tiled, high resistance flooring in the following sizes: 25 x 25 x 2.7cm or 30 x 30 x 3.3cm or 33 x 33 x 3.5cm or 40 x 40 x 3.9cm
This floor is laid with cement mortar or on a concrete plate.

DESCRIPTION
Prefabricated floor to be laid on existing plate with mortar. Tile consisting of a surface layer of a thickness of approx. 10mm and 20mm of a high dose sand and cement mortar.

WHERE IT IS APPLIED
Tiled prefabricated floor Laid on an existing plate. Suitable for loads (lI) and operations (M-P) (See DIN Standard 1100) Heavy industry, offices, inspection pits, car parks etc..

SPECIFICATION FOR THE DESIGN
DURSIL Tiles monolithic industrial flooring comprising:

1. TILES
   A mixture based on spheroidal quartz and hard minerals with the addition of special binders, with a homogeneous granulometric curve of between 0.125 and 3.0mm for an approx. thickness of 10mm. A layer with high sand and cement content of a thickness of 20mm approximately
2. MORTAR CONCRETE
   Sand and cement mortar at 400kg per cubic metre with a thickness of approx. 30/60mm. Mix the mortar in a horizontal pan
3. EXISTING CONCRETE PLATE
   Existing, cured concrete plate, clean from all impurities and moisture before laying
4. SUPPORTING BASE
   Soil stabilised using the Westergaard method