DURSIL is the brand of industrial flooring concrete.
Structural floors can be created or carried over for new construction or renovation. It is also suited for creating prefabricated floors in both tiles and self-bearing slabs.
DURSIL flooring, designed in accordance with performance use.

Structural reinforced monolithic flooring.
Thickness of 15/20cm Surface layer of Approx. 3mm.
This flooring is laid directly on ballast.
Standard UNI 11146 - Chapter 4.1 - NTC 1/2008

Structural reinforced monolithic flooring. Thickness of 20/30cm.
Surface layer of Approx. 10mm.
This flooring is laid directly on ballast.
Standard UNI 11146 - Chapter 4.1 - NTC 1/2008

Flush monolithic flooring.
Surface layer of between 10 and 50mm.
This floor is welded to the existing concrete plate.
Standard UNI 11146

Flush, monolithic, reinforced flooring.
Thickness of 5/10cm.
Surface layer of approx. 10mm.
This floor is anchored to a cured concrete plate.
Standard UNI 11146 - Chapter 4.4

Monolithic flooring on a supporting structure.
Thickness of 10/15cm.
Surface layer of approx. 3mm.
This flooring is laid on a concrete plate or on a prefabricated structure.
Standard UNI 11146 - Chapter 4.2

A lighter monolithic flooring on a supporting structure.
Thickness of 10/15cm.
Surface layer of approx. 3mm.
This flooring is laid on a prefabricated structure.
Standard UNI 11146 - Chapter 4.2

 
Industrial tiled, high resistance flooring in the following sizes: 25 x 25 x 2.7cm or 30 x 30 x 3.3cm or 33 x 33 x 3.5cm or 40 x 40 x 3.9cm This floor is laid with cement mortar or on a concrete plate.

 
Industrial plate, high resistance flooring in the following sizes: 2.0 x 2.0 x 0.15m This floor is laid on a bed of sand.